AMF2S - AMF Drywall Double Layer System
| NO | Item Description | Item Description |
|---|---|---|
| 1 | AMF Gypsum Board 15mm | Side A & B |
| 2 | AMF – Stud | Vertical Frame @ 600mm Center’s |
| 3 | AMF – Deep Track | Head Track – Anchored @ 600 mm Centre’s |
| 4 | AMF – Track | Base Track – Anchored @ 600 mm Centre’s |
| 5 | AMF – Track | Lateral Brace – @ 2400 mm Vertical Centre’s |
| 6 | AMF – Thru Bolt Anchors: M6 x 40 mm | Head Fixing Anchors @ 600 mm Centre’s |
| 7 | AMF – Sleeve Anchors: M6 x 40 mm | Base Fixing Anchors @ 600 mm Centre’s |
| 8 | AMF – Wafer Head Screws: M4.2 x 13 mm | Metal to Metal fixing |
| 9 | AMF – Bugle Head Self Tapping Screws | Board to Metal fixing |
| 10 | AMF – Jointing Tape | For Joint Finishing |
| 11 | AMF – Jointing Compound | For Joint Finishing |
| 12 | AMF – Acrylic Fire / Acoustic Sealant | At Wall Perimeter |
| 13 | AMF Recommended – Insulation | At Stud Cavity |
Note
Based on the performance requirement, the plasterboard needs to be selected – Regular for general applications; MR for Humidity area application; FW for enhanced fire resistance & for better acoustic; TF for enhanced Impact resistance etc..
Stud spacing and metal thickness will be determined by the partition height, deflection limit and lateral pressure. Min. recommended metal thickness is 0.55mm for fire rated partitions.
