AMFIS - AMF Drywall Shaftwall System
| NO | Item Description | Item Description |
|---|---|---|
| 1 | AMF Gypsum Board 25 & 15 mm | Side A & B |
| 2 | AMF –CH & E Stud | Vertical Frame @ 600mm Center’s |
| 3 | AMF – Deep Track | Head Track – Anchored @ 600 mm Centre’s |
| 4 | AMF – J Track | Base Track – Anchored @ 600 mm Centre’s |
| 5 | AMF – Flat Strap | Lateral Brace – @ 2400 mm Vertical Centre’s |
| 6 | AMF – Thru Bolt Anchors: M6 x 40 mm | Head Fixing Anchors @ 600 mm Centre’s |
| 7 | AMF – Sleeve Anchors: M6 x 40 mm | Base Fixing Anchors @ 600 mm Centre’s |
| 8 | AMF – Wafer Head Screws: M4.2 x 13 mm | Metal to Metal fixing |
| 9 | AMF – Bugle Head Self Tapping Screws | Board to Metal fixing |
| 10 | AMF – Jointing Tape | For Joint Finishing |
| 11 | AMF – Jointing Compound | For Joint Finishing |
| 12 | AMF – Acrylic Fire / Acoustic Sealant | At Wall Perimeter |
| 13 | AMF Recommended – Insulation | At Stud Cavity |
Note
Ideal for elevator shafts since the walls can be constructed from one side, leaving the shaft free of
scaffolding. This allows elevator equipment to be installed simultaneously. Shaft Wall Systems
provide superior safety and performance for an important building component such as Elevator,
MEP Shafts, stairwells, air return shafts and horizontal membranes
Depends on The wall height & Wall width the Gi Framing will be deigned, may use Acoustic
V-Brace when the Project requires High Walls
