AMFSX - AMF Drywall X-Ray Room Partition
| NO | Item Description | Item Description |
|---|---|---|
| 1 | AMF Gypsum Board 15mm | Side A & B |
| 2 | AMF – Stud | Vertical Frame @ 600mm Center’s |
| 3 | AMF – Deep Track | Head Track – Anchored @ 600 mm Centre’s |
| 4 | AMF – Track | Base Track – Anchored @ 600 mm Centre’s |
| 5 | AMF – Track | Lateral Brace – @ 2400 mm Vertical Centre’s |
| 6 | AMF – Thru Bolt Anchors: M6 x 40 mm | Head Fixing Anchors @ 600 mm Centre’s |
| 7 | AMF – Sleeve Anchors: M6 x 40 mm | Base Fixing Anchors @ 600 mm Centre’s |
| 8 | AMF – Wafer Head Screws: M4.2 x 13 mm | Metal to Metal fixing |
| 9 | AMF – Bugle Head Self Tapping Screws | Board to Metal fixing |
| 10 | AMF – Jointing Tape | For Joint Finishing |
| 11 | AMF – Jointing Compound | For Joint Finishing |
| 12 | AMF – Acrylic Fire / Acoustic Sealant | At Wall Perimeter |
| 13 | AMF Recommended – Insulation | At Stud Cavity |
Note
AMF X-Ray room Drywall Comprises of double layer partition, with single layer of 3.15mm
Lead Laminated ( X-Ray ) board fixed up to the height of X-ray’s Source passing. The X- ray
board consists of 3.15mm lead sheet laminated on a special gypsum board. Lead strips of 3.15mm
thick x 40mm width is glue fixed on the metal studs along the flanges facing the X-ray source
before installing the boards to stop the rays from the board joints.
