Deflection Head Track
The Deflection Head Track allows a vertical movement from the ceiling I roof. This vertical deflection prevents loads from being transferred to the studs.
U Track
Track sections provide a friction for the studs, which not only holds the studs in position until the lining board is fitted, but also helps in aligning the boards.
CStud
The C Studs are the vertical framings used for Partition and Liner Systems with a friction fit between bottom and top tracks. They are very easy to install and can be tailored in accordance to a project’s requirements. They are specially designed to accept for one layer and multi layer Gypsum Plaster Boards.
Expanded Metal Mesh
The Expanded Metal Mesh is a type of metal lath having an open mesh formed by slitting galvanized metal sheet as per specifications and exerting a cross-wise traction resulting in an irregular surface. As part of AMF Security wall it is fastened between the boards on each side of the core structure in multiple layer systems and between the studs / under the boards in single layer systems.
L Angle
L Angle is the perimeter member for partition & ceiling metal framework. Used for lateral bracing and other structural strengthening applications
Main Channel
Main Channel sections are cold roll formed from zinc coated steel strip is the primary member (carrying Channel) for Con-ventional Ceiling metal framework. This is suspended from the roof with wire hanger, adjustment clip and channel hanger.
Conventional Furring Channel
Conventional Furring Channel is the secondary member for ceiling metal framework. This is fixed to the main channel with Wafer head screws through the flange. The gypsum boards are screwed to furring channel.
Wall Angle
AMF Wall Angle is the perimeter member for ceiling metal framework. This is fixed to the wall.
Corner Bead (External)
Application:
Used to reinforce external corners in walls and ceilings.
The Expanded 90° ExternalCorner Beads are angled at 84° with 32mm expanded wings to allow setting compound to penetrate through and under the bead, at the same time locking the bead strongly to the board.
Corner Bead (Internal)
Application:
The Internal Corner Beads are ideal for a quick and easy finishing for your internal corners. The beads are available in a variety of standard and customized sizes.
Casing Bead
Application:
The Casing Beads serve as plaster blocks and are square cornered metal beads that fit snugly over the edge of AMF Plaster boards for protection at abutments, whilst no setting required. Upon installation, the Casing Beads allow stucco to maintain a straight line and may then be easily painted at site.
Stopping Angle
Application:
The Stopping Angle have a perforated, recessed edge and are used where the edge of the building board is not exposed and where the fitting of a Stopping Bead would be difficult. The Stopping Angle is fixed to the sheet of building board with an adhesive or staples, with the finishing coats bonding into the building board and feathering up to the bead nib. Ideally used for door jambs and window returns.