Wafer Head Screw
Heavy duty drill point wafer head screw with head diameter of 11 mm. These screws are self drilling framing screws for thicknesses up to 2.5 mm. Heavy duty self drilling Wafer Head Screws are used for rapid power attachment of a steel framing member to another.
Hex Head Screws
Hex Head Screws are self drill point zinc plated screws for heavy gauge metal to metal fastening from 0.7mm.
Self Tapping Screw
Heavy duty self tapping bugle head screw with head diameter of 8 mm, are self tapping fasteners for multiple layer drywalls, insulation and accessory mountings on steel structures up to 0.8 mm thickness.
Self Drilling Screw
Heavy duty drill point bugle head screw with head diameter of 8 mm, are self drilling fasteners for multiple layer drywalls, insulation and accessory mountings on steel structures up to 3.0 mm thickness.
Laminating Screws
Laminating Screws are fasteners for directly laminating gypsum boards together when used in more than 2 layers as well as fastening accessories to multiple gypsum board layer linings.
L Bracket
The L Bracket is a simple rigid structure in the shape of an L, one arm fixed to a vertical (Stud) surface, the other projecting horizontally fixed to the support such as Wall, Ceiling or Slab.
Suspension Rod Angle Bracket
Suspension Rod Angle Brackets are attached to the slab of the ceiling from one side and to the Suspension Rods from the other side.
Suspension Rod
The Suspension Rods are a component of the Keylock Ceiling System, whereby they are cut into the desirable length and then attached to the Suspension Rod Angle Bracket from one end and then into the Adjustable Suspension Hanger clip from the other end.
Adjustable Suspension Hanger Clip
The Adjustable Suspension Hangers Clip are a component of the Key lock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through it to be adjusted in accordance to your preferred height. The lower side of the hanger is specially designed and manufactured in order to hang the primary section (Top Cross Rail) to the ceiling.
Furring Clip
The Furring Clip are a component of the Key lock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through it to be adjusted in accordance to your preferred height. The lower side of the hanger is specially designed and manufactured in order to hang the primary section (Top Cross Rail) to the ceiling
KMUIL Anchors
High wrench resistant 6 mm diameter anchor made of a special steel shaft and an internal 6 mr- read part and a cone for forced expansion. The shaft is threaded on one side and has an expansible split part on the other side. Suitable for Fire Rated Systems. For suspensions from concrete slabs by the means of threaded rods to brackets supporting all kinds of drywall profiles where high work-load, safety and extreme rapidity of installation is required.
Threaded Rod
The Threaded Rods are designed to be used in high tension due to being relatively long rods and being threaded. They are used as a ceiling suspension by being fixed to hard point on one end such as soffit of concrete slab/beam or steel structure with appropriate fasteners and ceiling frame on the other.
C Clamp
The C Clamp is a strong bracket to hold the main channel for suspended ceilings of limited loads by the means of 6 mm & 8 mm threaded rod. It will accommodate a 38 mm & 45mm main channel allowing for structural suspension centres.
Extruded Polystyrene Foam (XPS)
xtruded Polystyrene Foam (XPS)* is a rigid thermal insulation board with skin and has closed cells with common sides They are produced on a continuous, fully automated extrusion process, in accordance with international specifications and standards. XPS tends to have a high resistance to water absorption. The manufacturing process, combined with intrinsic qualities of the static component of thermo plastic material, gives XPS predictable performance and high insulating value.
Glass Wool
Glass Wool* is a dimensionally stable light weight insulation material manufactured from stable glass fibers bonded with thermosetting resins. Due to its resilience, it readily recovers to its nominal thickness after the removal of a normal compressive load. It is rot proof, odorless, non-hygroscopic and will not sustain vermin or fungus.
Rock Wool
Rock Wool* is a stable insulation material manufactured from various types of diabase rock, mainly basalt of specific predetermined chemical compositions, which is melted at super high temperature in a technically advanced but simple process. The resulting natural silicate is drum spun at very high speeds to produce ‘hair-fine’ inert fibers that are bonded together with a special thermosetting resin and impregnated with special additives.
Fiber Jointing Tape
The Fibre Jointing Tape is a self adhesive tape with fine and strong fiber glass mesh. Its unique cross-fibre construction resists stretching to prevent cracking in drywall joints.
AMF Ready Mix Joint Compound
AMF ready mix joint compound is all purpose ready – mix vinyl – based quick drying filler, providing superior finish specially for AMF plaster Boards.
Acoustic Sealant
Acoustic Sealant is a low modulus, non-slumping, PSA composite sealant suitable for acoustic rated constructions. It is halogen free and isocyanate free for safer use.
Fire Sealant
Acoustic Sealant is a low modulus, non-slumping, PSA composite sealant suitable for fire & acoustic rated constructions. It is halogen free and isocyanate free for safer use.